Processing

• Rotary:
  Start: 800-1500 rpm -> End: 1800-2000 rpm
• Orbital:
  Start: Lower rotational speed range -> End: higher rotational speed range

• quickly gives brilliant shine
• powerfully removes scratches
• ensures maximum removal
• restores the shine to even heavily stressed clear coats

1. Clean surface thoroughly
2. Shake bottle and apply 3 (ø95 mm) - 7 (ø180 mm) pea-sized drops of polish to the polishing pad or lambskin, depending on pad size.
3. Use either a rotary or eccentric polishing machine and use the cross-coating method.
4. While polishing, apply strong, even pressure and run the product out at a consistent low speed.
5. At first, the polish will seem a little milky and should be worked in until only a slightly transparent/oily film is visible.
6. After polishing, remove polish residues with the premium microfiber cloth.
7. Depending on the demands of the surface, a second stage may be performed to achieve a high-gloss surface. Here, you have the option of reapplying the Menzerna Cut Force Pro or a Menzerna Finish. In both cases in combination with the Menzerna Soft Cut Foam Pad